Method
A screen turns public data and your inputs into a buildable area, a unit or square foot count, and a pro forma. Every step below runs as plain code in your browser. The same inputs always give the same answer.
Data sources
- Parcels. City of Greenville GIS parcels inside city limits (current). Elsewhere in the county, a February 2026 county parcel extract where it covers the point, then a 2019 full-county extract. The screen names the source it used. Older lines can miss later splits, so check the tax map before relying on them.
- Address search. The Greenville County address locator, then the U.S. Census geocoder. Parcel numbers search the parcel layers directly.
- Jurisdiction. U.S. Census TIGERweb incorporated places decide whether the City of Greenville, another town, or the county zones the parcel.
- Zoning districts. The City of Greenville zoning map inside the city and the Greenville County zoning map elsewhere, plus county overlay districts.
- Flood. FEMA National Flood Hazard Layer, flood hazard zones. Special flood hazard areas (zones A, AE, AH, AO, and V) and floodways are drawn.
- Wetlands. U.S. Fish and Wildlife Service National Wetlands Inventory.
- Demographics. U.S. Census Bureau ACS 2024 5-year estimates for 1,028 block groups in Greenville and the nine counties around it, located by Census internal points.
Buildable area
- The parcel outline is projected to South Carolina State Plane (EPSG 2273), in feet, so distances and areas are true.
- Each edge of the outline is classed. The front edge is the one you tap on the map, or the longest edge until you do. Edges facing within 45 degrees of the front direction are front edges. Edges facing within 60 degrees of the opposite direction are rear edges. The rest are side edges.
- Every point closer to an edge than that edge's setback is removed. This is the exact setback envelope, including rounded inside corners.
- Flood hazard areas and mapped wetlands are removed next, each behind its own switch.
- What remains is the net buildable area. The map fills it in the accent color.
Test cases ship with the code. A 200 by 300 foot lot with a 20 foot setback on every side returns 41,600 square feet, the exact answer.
Multifamily yield
The unit count is the smallest of four limits. The screen names the one that binds.
- Density: units per acre times gross acres.
- Floor area ratio: FAR times site area, divided by the gross area per unit (unit size divided by efficiency).
- Lot coverage: coverage times site area, divided by the building footprint per unit.
- Room on the site: the buildable area less the share kept for drives and open space, divided by the land each unit needs: its footprint (gross area per unit divided by stories) plus its parking (spaces per unit times the area of one stall).
Stories are your choice, capped by the story limit and by the height limit divided by the floor to floor height. Parking is surface parking.
Self-storage yield
Building footprint is a share of the buildable area: lower for single-story drive-up, where drive aisles run between buildings, and set separately for multi-story. Lot coverage and floor area ratio cap the result. Gross area times efficiency gives net rentable square feet.
Pro forma and land value
- Gross potential rent = units x (rent + other income) x 12. For storage, rentable sf x rent per sf x occupancy.
- Effective gross income = gross potential rent x (1 - vacancy).
- Net operating income = effective gross income x (1 - operating expense ratio).
- Hard cost = gross sf x cost per gross sf, plus parking stalls x cost per stall.
- Soft cost = hard cost x soft cost percent.
- Storage lease-up shortfall = net operating income x lease-up years x 0.5, which assumes occupancy rises in a straight line.
- Value = net operating income / cap rate.
- Residual land value = value / (1 + return on cost) - cost before land. This is the most the land can carry while the project still earns your return.
- Yield on cost = net operating income / cost, shown before land and, when you enter a price, with land.
Market rings and demand
A block group counts toward a 1, 3, or 5 mile ring when its Census internal point is inside the ring. Population, households, and renter households are sums. Medians cannot be summed, so income and rent are averages of block group medians weighted by households and renter households.
The storage demand score is 50 x benchmark sf per person / local sf per person, held between 0 and 100. You enter local supply, because no free public list of storage facilities exists. A score of 50 means local supply matches the national benchmark.
Zoning limits on file
Each limit was read from the official ordinance text and stored with its section and a verbatim quote. A build check fails if any quote is missing from the saved source text. Limits that could not be confirmed are marked not on file, and the screen asks you for them.
| Jurisdiction | Districts | Core limits sourced |
|---|---|---|
| Unincorporated Greenville County | 27 | 144 of 162 |
| City of Greenville | 25 | 99 of 150 |
Core limits are the three setbacks, height, density, and parking per unit.
Unincorporated Greenville County districts
R-M2 (Multifamily Residential District), R-M4 (Multifamily Residential District), R-M5 (Multifamily Residential District), R-M6 (Multifamily Residential District), R-M7 (Multifamily Residential District), R-M8 (Multifamily Residential District), R-M10 (Multifamily Residential District), R-M12 (Multifamily Residential District), R-M14 (Multifamily Residential District), R-M16 (Multifamily Residential District), R-M20 (Multifamily Residential District), R-MA (Multifamily Residential District), NC (Neighborhood Commercial District), POD (Planned Office District), C-1 (Commercial District), C-2 (Commercial District), C-3 (Commercial District), S-1 (Services District), I-1 (Industrial District), PD (Planned Development District), R-S (Residential Suburban District), R-20 (Single-Family Residential District), R-15 (Single-Family Residential District), R-12 (Single-Family Residential District), R-10 (Single-Family Residential District), R-7.5 (Single-Family Residential District), UNZONED ((unincorporated, no zoning district))
City of Greenville districts
RH-A (House A), RH-B (House B), RH-C (House C), RH-D (House D), RN-A (Neighborhood A), RN-B (Neighborhood B), RNX-B (Neighborhood Flex B), RN-C (Neighborhood C), RNX-C (Neighborhood Flex C), RC-2 (Community 2), RC-3 (Community 3), RC-5 (Community 5), MX-2 (Mixed Use 2), MX-3 (Mixed Use 3), MX-5 (Mixed Use 5), MX-D (Mixed Use Downtown), MXS-2 (Shopfront 2), MXS-3 (Shopfront 3), MXS-D (Shopfront Downtown), BG (Business General), BH (Business Heavy), IX (Industrial Flex), IG (Industrial General), CM (Campus), PD (Planned Development)
Default assumptions
Every default can be changed on the screen. Values marked assumption are judgment calls informed by the source shown.
Multifamily
| Input | Default | Basis |
|---|---|---|
| Average rent per unit | $1,339 per unit/mo | Source |
| Other income per unit | $75 per unit/mo | Assumption, see source |
| Average unit size | 954 sf | Source |
| Net-to-gross efficiency | 85 % | Assumption, see source |
| Hard cost, garden-style wood frame | $160 per gsf | Assumption, see source |
| Operating expense ratio | 35 % | Assumption, see source |
| Surface parking per stall, with aisles | 325 sf | Assumption, see source |
| Soft costs | 25 % of hard cost | Assumption |
| Floor to floor height | 10.5 ft | Assumption |
| Share of envelope for drives and open space | 25 % | Assumption |
| Surface parking cost per stall | $5,000 per stall | Assumption |
| Developer return on cost | 15 % | Assumption |
| Stories | 3 stories | Assumption |
Self-storage
| Input | Default | Basis |
|---|---|---|
| Street rent per rentable sf | $12 per sf/yr | Assumption, see source |
| Hard cost, single-story drive-up | $70 per gsf | Assumption, see source |
| Hard cost, multi-story climate-controlled | $130 per gsf | Assumption, see source |
| Rentable efficiency, single-story | 85 % | Assumption, see source |
| Rentable efficiency, multi-story | 75 % | Source |
| Operating expense ratio | 35 % | Assumption, see source |
| Stabilized occupancy | 90 % | Assumption, see source |
| Lease-up period | 36 months | Assumption, see source |
| US storage supply per person | 7.6 sf/person | Source |
| Soft costs | 20 % of hard cost | Assumption, see source |
| Building share of envelope, single story | 40 % | Assumption |
| Footprint share of envelope, multi-story | 35 % | Assumption |
| Floor to floor height | 10 ft | Assumption |
| Developer return on cost | 15 % | Assumption |
| Stories, multi-story product | 3 stories | Assumption |
Both
| Input | Default | Basis |
|---|---|---|
| Cap rate, multifamily | 5.8 % | Source |
| Cap rate, self-storage | 6 % | Assumption, see source |
| Vacancy and credit loss | 5 % | Assumption, see source |
What the AI does
The AI never computes a number. It has two jobs, and code checks each one.
- Reading zoning text. You paste ordinance text, and the model returns each limit with the sentence it came from. Code keeps a limit only when that sentence is in your text word for word and contains the number. Nothing changes until you apply it.
- Drafting a memo. The model writes three paragraphs from the summary facts. Code compares every number in the draft to the facts and discards the draft if any number does not match.
Both use Cloudflare Workers AI. Requests are limited per visitor per hour.
Limits of a screen
A screen is a first look. It is not an appraisal, survey, engineering study, legal opinion, or zoning determination. Tax map lines are not surveyed boundaries. Flood and wetland maps are approximate, and a site visit or delineation can find more or less. Utilities, access, slope, soils, stormwater, buffers, and conditional approvals are not modeled. Confirm every number with the planning office and licensed professionals before you buy or build.